Tube bundle with aluminium fins, which ensure four times larger cooling area in comparison with the ordinary tube heat exchangers. Heat dissipation up to 230 kW. Resistance to high working pressure: max 35 bars. Removable end caps, which provide quick access for cleaning the water tubes. An additional possibility of incorporating an internal bypass check valve (patented).
Upon the client’s request: Version for use with sea water.

Tube bundle with aluminium fins. An extremely compact heat exchanger, developed on the basis of the models of the ЕКМ series, however, the ECM heat exchangers have wider applications.
Heat dissipation: up to 900 kW
Oil flow rate: up to 1000 l/min
Maximum pressure: 20 bars

Tube heat exchanger with rigid tubes and internal bypass segments. Similar to the СМ series, however, the AM heat exchanger is based on the ITT standard (American standard).
100% interchangeable with the models of the BCF series.
It is suitable for water/water applications.
Upon the client’s request: Version for use with sea water.

Tube bundle with aluminium fins.
An extremely compact heat exchanger for installation within the tank. The UKTM heat exchanger has been developed on the basis of the models of the ЕКМ series and possesses very good technical characteristics.
It is designed for installation within the tank. It occupies a small space and does not need large piping.

Tube heat exchanger with rigid tubes and internal bypass segments. The offered range consists of 106 models manufactured from different materials. For instance, the SSCM model is entirely made of stainless steel.
Heat dissipation: up to 300 kW
Oil flow rate: up to 760 l/min
Maximum pressure: 20 bars

Heat exchanger with rigid tubes and internal bypass segments, which has been developed on the basis of the models of the АМ series. The double tubes prevent the mixing of fluids and provide protection against overpressure and corrosion.
The pre-charged piston accumulator compensates for the changes in the fluid volume, which result from temperature differences, and keeps almost constant the pressure of the fluid in the closed loop.

Soldered plate heat exchanger made of stainless steel.
It is compact and cost-effective.
Oil pressure: up to 30 bars
Oil flow rate: from 25 up to 3000 l/min
Operating temperature: from -100 up to +195°С
It is also available with nickel coating. Wide range of mounting dimensions. Insulation made of PU hard foam.

Plate heat exchanger of stainless steel with threaded connection. The plates are situated within a frame and are connected together by way of two holding boards. Thus, they can be quickly disassembled, and that allows for easy servicing and cleaning. Possibility of enlargement through adding supplementary plates.
Oil pressure: up to 25 bars; Oil flow rate: from 25 up to 3000 l/min.; Operating temperature: from -40 up to +170°С.

Oil/Air cooler for industrial applications.
Wide range of models: from LKI 100 up to LKI 1000.
Block-type construction.
Maximum working pressure: 26 bars
Flow mode: Single and dual versions.

Oil/Air cooler for mobile applications.
Upon the client’s request, versions different from the standard ones are also available.
Static working pressure: max 26 bars
LKM model - 12V and 24V electric supply.
LKHYD model is available in a hydraulic drive version.

Oil/Air cooler for both industrial and mobile applications. Aluminium fins with copper tubes.
Heat dissipation up to 75 kW at operating temperature of 40°С. Oil flow rate up to 675 l/min.
An additional bypass valve is available as an option. The cassette of the air filter is replaceable.

A compact unit for cooling a parallel flow. The system consists of a pump, an electric motor and an oil/air cooler. It is an autonomous unit which can be operated independently of the main system. The pump is directly connected to the electric motor by way of a flange.
An extremely low level of noise owing to the dual gear pump with internal engagement. Possibility of various mounting positions. The unit is available in three sizes.

A compact unit for cooling a parallel flow. Unlike TFS/A, here the fan blows the heat upwards.
The level of noise is additionally reduced by the housing.
Upon the client’s request, an air and oil filter can be incorporated.
The unit is available in four different sizes.

A compact unit for cooling a parallel flow.
The system consists of a pump, an electric motor, a filter and an oil/water heat exchanger (EKM or PWT), which operate together.
The continuous, parallel cooling of the working fluid increases the efficient and reliable operation of hydraulic systems.

Individual designs upon the client’s request, for instance, units for cooling in a parallel chain (50-100 kW).
There is an additional possibility of incorporating hydraulic components, such as filters, water regulation valves, and temperature controls. For achieving even better cooling, several heat exchangers can be combined together.